The below E92 BMW M3 looks smashing with the new body wrap, which is the rare Space Grey. However, the owner wanted to full around with a couple of carbon fiber enhancements and new wheels from no other than Vorsteiner, also a truly-dedicated BMW tuner.

The gorgeous body wrap exploits the car`s design lines to the full, while the new alloy wheels from Vorsteiner enhance the aggressive looks we all expect to see on a genuine BMW M3. The Vorsteiner wheels refer to Vorsteiner V-FF 108 FlowForged alloy wheels, and measure 18 x 9.5 and 18 x 10.5 front and rear, respectively. In case you remember from previous posts, these are the same high-performance wheels also equipping the present generation BMW M3/M4 in aftermarket disguises.

The wheels and the carbon fiber parts were installed by German tuner Supreme Power, also an important BMW dedicated aftermarket shop.

Besides the wheels, the E92 BMW M3 has also received some new visuals, like carbon fiber front splitters, LED lights and rear deck-lid spoiler.

As much as we would have wanted a power boost under the hood, this model remains so far faithful to its stock 4.0-liter V8 pot, with no less than 414 horsepower and 300 lb-ft of torque. With an electronically-limited top speed of 250 km/h, this lad here is capable of sprinting from 0 to 100 km/h in just 4.3 seconds, making it a tad slower than the current M3.

Supreme Power tuner firm has also released a gorgeous media gallery with their latest take on an E92 BMW M3. Enjoy and don’t forget to share your opinions with us!

And even with the fierce competition in the tuning segment, aftermarket shops sometimes join forces to create special models, especially when it comes to wrapping them with aftermarket wheels. For that, EAS have commissioned Vorsteiner`s special rims to fit them on the below BMW M4.

This gorgeous F82 BMW M4 is wrapped in Austin Yellow body colour and looks magnificent with the new wheels from Vorsteiner. We are looking here at the tuner`s new addition – V-FF 107 Flow Forged, recently added to the Flow Forged lineup.

They measure 20 x 8.5 and 20 x 10.5 front and rear and are finished in Carbon Graphite. They also provide the model with better grip and increase its stance, not to mention the more aggressive look that it gives.

As for the car`s power under the hood, there seem to be no modifications added so far. This means that this hot-looking F82 M4 still packs the stock yet high-performance 3.0-liter BMW TwinPower Turbo flat-six, also seen on its little sibling the M3 Sedan. The engine outputs 431 horsepower and 550 Nm of torque, sending the power to the rear via a six-speed manual. The sprint from 0 to 100 km/h is also done in 4.1 seconds, but when hooked with the seven-speed M-DCT transmission, the model runs the same sprint in just 3.9 seconds. The topping is electronically limited at 250 km/h.

You can find out more details about the F82 BMW M4 on Vorsteiner wheels in the media gallery below! Enjoy and don’t forget to share your opinions with us!

The latest aftermarket shop to take the Audi R8 V10 Plus for an impressive program is the well-known German-based tuning company Vorsteiner. Even if we are used to seeing the tuner`s signature on BMW products, this time it`s this Audi below which has received the standout treatment.

The tuner`s kit is names the VRS Aero Program, and comes with three carbon fiber components, with prices also to be unveiled – we are looking here at new front spoiler with metallic accent ($2,695), prominent rear diffuser ($3,295) and massive rear wing ($2,895), the latter one increasing the car`s aerodynamics at high-speeds.

The three-piece carbon fiber kit perfectly fits the new wheels, providing the model with an extremely aggressive look and increase stance.

As for the car`s powertrain under the hood, this lad here has not received any modifications. This means that we are still dealing with the 5.2-liter twin-turbo V10 engine, the same one found on the Lamborghini Huracan, capable of delivering a staggering 1,250 horsepower, allowing thus a sprint from 0 to 100 km/h in just 3.2 seconds. The topping is electronically set at 330 km/h.

You can find out more details with the Audi R8 V10 Plus by Vorsteiner in the media gallery below. Enjoy and don`t foget that your opinions does count to us!

The wheels were provided by no other than the German folks from the well-known Vorsteiner tuning company, who are quite familiar with BMW products, particularly the baby-M, which has been customized numerous times.

The Vorsteiner`s wheels involve the V-FF 103 Flow Forged Wheels, sized 19 x 9 and 19 x 10.5 front and rear, respectively, and finished in Carbon Graphite, which provide the car`s Mineral Gray exterior with a magnificent look.

And this particular projects doesn’t need anything else, the model still packing the same M parts at the exterior as well as inside, which make it extremely aggressive. As usual, the tuning company has left the engine intact.

The BMW M2 Coupe comes with an S55 3.0-liter M TwinPower Turbo inline straight-six, which is not the same found on the M3/M4, capable of delivering a good 370 horsepower and 465 Nm of torque, capable of sprinting from 0 to 100 km/h in just 4.5 seconds when hooked to a DCT, so the figures are almost as much impressive as an M3.

You can find out more about the Vorsteiner`s Mineral Gray BMW M2 Coupe in the media gallery below. Enjoy the ride and don’t forget to share your opinions with us!

As for the BMW M5, the model has been recently involved in another program mainly involving the fitting of a new set of wheels and some styling goodies, overall the model looking like a military vehicle ready for some shooting actions.

As we can depict from the media gallery below, the BMW M5 by Vorsteiner comes with an astonishing paint job, which is the rare Matte Military wrap, adding as well other interesting body parts.

We are looking here at a carbon fiber splitter, rear diffuser, small trunk lid lip spoiler, all perfectly blending with the new lowering springs which lower the car`s ride height and increasing its stance.

The overall design is also complemented with the tuner`s one-off set of wheels. We are looking here at the 105 V-FF Flow Forged alloy wheels finished in Gunmetal Grey. The wheels are sized 20 x 8.5 up front and 20 x 10.5 at the rear, making the car more aggressive and providing more grip.

Vorsteiner tuner is well-known for customizing BMW models at the exterior, leaving the engine department for other tuning companies.

This means that the BMW M5 by Vorsteiner still packs the stock and massive 4.4-liter V8 petrol engine, with impressive 560 horsepower and 680 Nm of torque. Model sprints from 0 to 100 km/h in just 4.2 seconds, at an electronically limited top speed of 250 km/h. In case you remove the speed limiter, then your car will be able to speed up to 300 km/h.

It did happened with Vorsteiner, one of the most famous aftermarket shops in the world, which knows BMW products in-and-out, particularly the M3 or the M4. And that was indeed an easy task to carry out on the M4 GTS.

The model needs no presentation, as it comes adorned at the exterior with M Performance Parts, most of them from carbon fiber, which makes it appealing and high-performance at the same time. So why spoiling the design?

The technicians have thus left the exterior intact, adding just a set of new wheels, which is enough to add more aggressive attitude and stance. We are looking here at the 20-inch VSE 101 alloy wheels, finished in gloss black and providing the model a greater stance.

From what we know, and is not a custom thing for Vorsteiner, there weren’t any modifications carried out under the hood, the BMW M4 GTS coming with the same yet high-performance stock performance.

We are looking here at the latest technology in the powertrain area, a benchmark which will definitely be a true inspiration for other carmakers. The car is using a conventional engine paired to water injection technology, helping the M4 GTS achieve 500 horsepower. This allows an acceleration from 0 to 100 km/h in a mind-blowing 3.8 seconds, and a top speed of 305 km/h. this makes it one of the most high-performance and fastest BMW M models ever produced in stock form.

And we have seen a lot of BMW products receiving the tuner`s outstanding aero kits and wheels. Now, the aftermarket specialists have turned their attention towards the high-end Porsche Cayenne, the SUV getting a nice body kit with exquisite features.

What is really eye-catching about this Vorsteiner Porsche Cayenne is the clear-coated pre-preg carbon fiber kit going just swell with the pearl white at the exterior, the model also receiving the 22-inch V-FF Vorsteiner alloy wheels, finished in matte gunmetal and increasing the car`s aggressive look.

Besides the wheels and nice body wrap, the car`s main highlight are reflected by the bespoke side skirts and rear diffuser, as well as the custom exhaust system with the new tailpipes.

There were no mods under the hood, the model still retaining the stock engine. The SUV is already looking menacing under the hood, with the new 3.6-liter V6, which replaces the former 4.8-liter V8 engine, the 2015 model developing a good 420 horsepower and 550 Nm of torque. On the other hand, the Turbo version comes with the 4.8-liter V8 which outputs 520 horsepower. So, there was no need of any upgrades for this fine lad here.

Vorsteiner tuning has also released an amazing photo gallery below, enjoy the ride and don’t forget to share your opinions with us! Would take your Porsche Cayenne to Vorsteiner for some fine-tuning and a new set of V-FF wheels?

The result is truly amazing, the convertible now standing on the shop`s special wheels and wrapping a carbon aero kit. No mods we added under the hood, the BMW M4 Convertible packing the stock engine, also found on the M3 and M4 standard models.

Performance wise, the BMW M4 COnvertibe comes with the stock 3.0-liter BMW TwinPower Turbo flat-six inline engine, the same found on its coupe sibling, churning out a good 425 horsepower and 500 Nm of torque. The topping of 250 km/h allows a sprint from 0 to 100 km/h in a good 4.3 seconds.

This BMW M4 Convertible is wrapped in a pure black exterior color and comes with some carbon fiber parts on the body, the most important ones representing the carbon front lip spoiler and aero rear diffuser.

The project is yet to be finished, the technicians from Vorsteiner shop also fitting their V-FF 104 FlowForged alloy wheels. The wheels are sized 19×9.5 and 19×10.5 front and rear, and finished in the gorgeous Carbon Graphite trim.

Now we have a nicely wrapped Sapphire Black Metallic BMW M4 Convertible with standout wheels and some impressive carbon aero parts, which make it look extremely hot and aggressive. Enjoy the photo gallery released by the tuner and don’t forget to share your opinions with us!

The gorgeous BMW M4 is back into the spotlights again, the model now coming with a wide carbon fiber GTRS4 kit, courtesy to the US Boden Autohaus tuner.

The Red BMW M4 GTRS4 is looking insane with the new carbon fiber aero parts, massive fenders, updated front and rear bumpers, new grille inserts, massive front and rear fenders, adding the one-off sills or boot lid spoiler.

Impressive and aggressive as it may look, this particular M4 has not received a power increase as we all might have expected, especially since we are looking here at a menacing GTRS4 kit.

This red lad here is still packing a 3.0-liter M TwinPower Turbo inline six-cylinder engine, with 431 horsepower and 500 Nm of torque on board. The power is sent to the wheels via a six-speed manual, allowing a sprint from 0 to 100 km/h in 4.3 seconds. However, hooked to a high-performance seven-speed dual-clutch transmission, the same straight run is done in just 4.1 seconds. The topping is limited to 250 km/h.

Boden Autohas tuner has also released an impressive photo gallery with their latest work, enjoy the ride and don’t forget to share your opinions with us! Besides the impressive GTRS4 kit, should this lad also have come with more power under the hood?

It seems that the tuner is also working on a Mclaren 570S, recently previewed online in a rendering, this fine lad coming with a fine yet subtle program.

As we can depict from the rendering, the McLaren 570S by Vorsteiner is wearing custom front splitter and rear diffuser, new side skirts and optional rear wing. As expected, the supercar will also receive a new set of custom wheels, perhaps the V-103 FF Forged Wheels, the tuner`s latest product.

The overall design will be complemented by the one-off matte or flossy coat, which will make it more aggressive and appealing. We should expect the full details in the upcoming months.

We won`t expect any mods added under the hood, this McLaren 570S by Vorsteiner being expected to pack the same 3.0-liter twin-turbo V8 engine, with 570 horsepower and 600 Nm of torque. The power is sent to the wheels via a seven-speed SGG transmission which allows a sprint from 0 to 100 km/h in just 3.2 seconds, at a topping of 328 km/h.

The McLaren 570S is the cheaper alternative for those who “can`t” afford a topper 650S or a 675LT. Even so, the supercar is the perfect combatant against the Mercedes-AMG GT or Porsche 911.